icon-call-out

need help?(+61) 2 9632 9909

Shop

Product Category

FED

Showing 7723–7731 of 21573 results

Fagor Kore 700 Gas Pasta Cooker with 4 Baskets – CP-G7226

Fagor Kore 700 Gas Pasta Cooker with 4 Baskets – CP-G7226

Gas Pasta Cooker with 4 Baskets – CP-G7226

  • Surface tops manufactured in 1.5 mm thick AISI-304 stainless steel.
  • Laser-cut joints, automatic welding and polishing. Hidden screws.
  • 1.5 mm thick AISI-316L stainless steel wells built into the surface top.
  • Wells that suit with different arrangements and measures of baskets.
  • The well is filled through the inlet solenoid valve with a two-position switch: average and high-speed filling.
  • Well drainage through a mechanical ball valve which is resistant to high temperatures and has a safety overflow.
  • Automatic safety system to stop the current if the water runs out.
  • Controls with a protective support base and system to prevent water infiltration.
  • Access to components from the front.
  • Stainless steel feet with adjustable height.
  • Machines with IPX5 grade water protection.
  • High-performance stainless-steel burner located outside of the well with a combustion chamber that enables heating of the base and sides of the well (up to the minimum filling level).
  • Burner ignition through electronic spark igniter. With an access tube for manual ignition.
  • Heating controlled through safety valve.
  • Two wells of dimensions GN-2/3, with 26 litres capacity.
  • Standard provision: Four 1/3 type baskets.

 

2 Years Parts and Labour + 2 Years Parts only Warranty with Product Registration

2 Years Parts and Labour + 2 Years Parts only Warranty with Product Registration within 14 Days of Invoice

Fagor Kore 700 Gas Pasta Cooker with 6 Baskets – CP-G7240

Fagor Kore 700 Gas Pasta Cooker with 6 Baskets – CP-G7240

Gas Pasta Cooker with 6 Baskets – CP-G7240

  • Surface tops manufactured in 1.5 mm thick AISI-304 stainless steel.
  • Laser-cut joints, automatic welding and polishing. Hidden screws.
  • 1.5 mm thick AISI-316L stainless steel wells built into the surface top.
  • Wells that suit with different arrangements and measures of baskets.
  • The well is filled through the inlet solenoid valve with a two-position switch: average and high-speed filling.
  • Well drainage through a mechanical ball valve which is resistant to high temperatures and has a safety overflow.
  • Automatic safety system to stop the current if the water runs out.
  • Controls with a protective support base and system to prevent water infiltration.
  • Access to components from the front.
  • Stainless steel feet with adjustable height.
  • Machines with IPX5 grade water protection.
  • High-performance stainless-steel burner located outside of the well with a combustion chamber that enables heating of the base and sides of the well (up to the minimum filling level).
  • Burner ignition through electronic spark igniter. With an access tube for manual ignition.
  • Heating controlled through safety valve.
  • Two wells of dimensions GN-1/1, with 40 litres capacity.
  • Standard provision: Six 1/3 type baskets.

 

2 Years Parts and Labour + 2 Years Parts only Warranty with Product Registration

Fagor Kore 700 Series 6 Burner Gas Range with Gas Oven – C-G761H

Fagor Kore 700 Series 6 Burner Gas Range with Gas Oven – C-G761H

Fagor Kore 700 Series 6 Burner Gas Range with Gas Oven – C-G761H

Fagor Kore 700 Series 6 Burner Gas Range with Gas Oven – C-G761H

6 Burner Gas Range with Gas Oven – C-G761H

  • Deep-drawn surface tops manufactured in 1.5 mm thick AISI-304 stainless steel.
  • Laser-cut joints and automatic welding. Hidden screws.
  • 397 x 580 mm double grates (397 x 290 mm for each burner) enabling the use of large pots and pans. The reduced distance of 75 mm between the central bars makes it possible to use pots with a very small diameter (8 cm), avoiding the risk of smaller pans tipping over.
  • The grates are made of RAAF enamelled cast iron (resistant to alkaline and acid products, fire and high temperatures).
  • Double-crown burners and diffusers made of nickel-plated cast iron which guarantee an even distribution of heat from the flame to the base of the pans, even for large pans. This therefore prevents heat from building up in a specific point and optimises energy transfer to the product.
  • Burners are easy to position.
  • Low-consumption pilot light and thermocouple located within the body of the burner for greater protection.
  • Flexible stainless-steel gas pipes, facilitating internal manipulations in order to make repairs easier.
  • Controls with a protective support base and system to prevent water infiltration.
  • High-temperature enamelled cast iron flue protector which is flush with the grates therefore improving manoeuvrability, supporting larger containers and increasing the usable surface area.
  • Access to components from the front.

STATIC GAS OVEN WITH DIMENSIONS GN-2/1:

  • Static gas oven with dimensions GN 2/1 user firendly, with controls positioned on the upper panel for  better ergonomy.
  • Cooking chamber made entirely of stainless steel which makes cleaning easier and ensures greater hygiene.
  • Trays are inserted sideways which improves manoeuvrability.
  • Tubular stainless-steel burner with pilot light and thermocouple and piezoelectric ignition.
  • Heating power of 8,60 kW.
  • Thermostatic valve for temperature control (125 – 310 °C).
  • Rails on three height levels to offer different cooking options.
  • Rails with anti-tipping system to prevent trays from overturning.
  • Cast iron oven floor which guarantees better performance and uniform heat distribution.
  • Fibreglass closing seal to improve the thermal efficiency of the oven and ensure its durability.
  • Deep-drawn oven frame and inner door, ensuring a better oven closure.
  • Detachable oven door to facilitate repairs.
  • Stainless steel feet with adjustable height.
  • Six burners on the worktop with different powers, enabling the use of different pots and pans and different foods: 6 x 8,0 kW (Ø 120 mm).

OPTIONAL ACCESSORIES

  • Frying plate to place on 5.25 kW burners.
  • Water column.

2 Years Parts and Labour + 2 Years Parts only Warranty with Product Registration

Fagor Kore 700 Series Bench Top 4 Gas Burners – C-G740H

Fagor Kore 700 Series Bench Top 4 Gas Burners – C-G740H

Bench Top 4 Gas Burners – C-G740H

  • Deep-drawn surface tops manufactured in 1.5 mm thick AISI-304 stainless steel.
  • Laser-cut joints and automatic welding. Hidden screws.
  • 397 x 580 mm double grates (397 x 290 mm for each burner) enabling the use of large pots and pans. The reduced distance of 75 mm between the central bars makes it possible to use pots with a very small diameter (8 cm), avoiding the risk of smaller pans tipping over.
  • The grates are made of RAAF enamelled cast iron (resistant to alkaline and acid products, fire and high temperatures).
  • Double-crown burners and diffusers made of nickel-plated cast iron which guarantee an even distribution of heat from the flame to the base of the pans, even for large pans. This therefore prevents heat from building up in a specific point and optimises energy transfer to the product.
  • Burners are easy to position.
  • Low-consumption pilot light and thermocouple located within the body of the burner for greater protection.
  • Flexible stainless-steel gas pipes, facilitating internal manipulations in order to make repairs easier.
  • Controls with a protective support base and system to prevent water infiltration.
  • High-temperature enamelled cast iron flue protector which is flush with the grates therefore improving manoeuvrability, supporting larger containers and increasing the usable surface area.
  • Access to components from the front.
  • Four burners on the worktop with different powers, enabling the use of different pots and pans and different foods: 4 x 8,0 kW (Ø 120 mm).

OPTIONAL ACCESSORIES

  • Frying plate to place on 5.25 kW burners.
  • Water column.

2 Years Parts and Labour + 2 Years Parts only Warranty with Product Registration

Fagor Kore 700 Series Bench Top 6 Gas Burners – C-G760H

Fagor Kore 700 Series Bench Top 6 Gas Burners – C-G760H

Bench Top 6 Gas Burners – C-G760H

  • Deep-drawn surface tops manufactured in 1.5 mm thick AISI-304 stainless steel.
  • Laser-cut joints and automatic welding. Hidden screws.
  • 397 x 580 mm double grates (397 x 290 mm for each burner) enabling the use of large pots and pans. The reduced distance of 75 mm between the central bars makes it possible to use pots with a very small diameter (8 cm), avoiding the risk of smaller pans tipping over.
  • The grates are made of RAAF enamelled cast iron (resistant to alkaline and acid products, fire and high temperatures).
  • Double-crown burners and diffusers made of nickel-plated cast iron which guarantee an even distribution of heat from the flame to the base of the pans, even for large pans. This therefore prevents heat from building up in a specific point and optimises energy transfer to the product.
  • Burners are easy to position.
  • Low-consumption pilot light and thermocouple located within the body of the burner for greater protection.
  • Flexible stainless-steel gas pipes, facilitating internal manipulations in order to make repairs easier.
  • Controls with a protective support base and system to prevent water infiltration.
  • High-temperature enamelled cast iron flue protector which is flush with the grates therefore improving manoeuvrability, supporting larger containers and increasing the usable surface area.
  • Access to components from the front.
  • Six burners on the worktop with different powers, enabling the use of different pots and pans and different foods: 6 x 8,0 kW (Ø 120 mm).

 

OPTIONAL ACCESSORIES

  • Frying plate to place on 5.25 kW burners.
  • Water column.

 

2 Years Parts and Labour + 2 Years Parts only Warranty with Product Registration

Fagor Kore 700 Series Bench Top Gas Chargrill – B-G705

Fagor Kore 700 Series Bench Top Gas Chargrill – B-G705

Bench Top Gas Chargrill – B-G705

  • Stamped surface tops manufactured in 1.5 mm thick AISI-304 stainless steel
  • Laser-cut joints and automatic welding. Hidden screws.
  • Fitted with an opening to collect cooking grease and a tray to store it.
  • Machines are fitted with removable 130 mm high guards to prevent splashes, made of stainless steel.
  • High temperature enamelled cast iron flue protector.
  • Access to the components from the front.
  • Machines with IPX5 grade water protection.
  • Mild steel grills, dismountable without the need for tools, in 170 mm wide sections.
  • The mild steel grills are reversible, with different finishes on each side:
    ·Tilted and grooved with ridges for meat
    ·Horizontal and flat for fish and vegetables
  • These grills reach a very high temperature (400 ºC), meaning that the surface of the product is quickly sealed and inside it remains much juicier.
  • Groups of high-efficiency tube burners, (a group of two burners for half-sized module models, two groups for whole module models).
  • Independent control for each group of burners via a safety valve with a thermocouple.
  • Burners turned on using Piezo electric ignition.
  • The burners heat ceramic stones that sit on a supporting rack, so that they can then heat food on the grill.

 

2 Years Parts and Labour + 2 Years Parts only Warranty with Product Registration

Fagor Kore 700 Series Bench Top Gas Chargrill – B-G7101

Fagor Kore 700 Series Bench Top Gas Chargrill – B-G7101

Bench Top Gas Chargrill – B-G7101

  • Stamped surface tops manufactured in 1.5 mm thick AISI-304 stainless steel
  • Laser-cut joints and automatic welding. Hidden screws.
  • Fitted with an opening to collect cooking grease and a tray to store it.
  • Machines are fitted with removable 130 mm high guards to prevent splashes, made of stainless steel.
  • High temperature enamelled cast iron flue protector.
  • Access to the components from the front.
  • Machines with IPX5 grade water protection.
  • Mild steel grills, dismountable without the need for tools, in 170 mm wide sections.
  • The mild steel grills are reversible, with different finishes on each side:
  • Tilted and grooved with ridges for meat ·Horizontal and flat for fish and vegetables
  • These grills reach a very high temperature (400 ºC), meaning that the surface of the product is quickly sealed and inside it remains much juicier.
  • Groups of three high-efficiency tube burners, with a radiant deflector (a group of three burners for halfsized module models, two groups for whole module models).
  • Independent control for each group of burners via a safety valve with a thermocouple.
  • Burners turned on using electric multispark ignition. With an access tube for manual ignition.
  • The fat collection trays provide the option of adding water into them, and thanks to heat radiated from the gas burners or electrical elements, a low intensity steam is generated, causing the roast to be carried out in a humid environment.
     

    2 Years Parts and Labour + 2 Years Parts only Warranty with Product Registration

 

  •  

2 Years Parts and Labour + 2 Years Parts only Warranty with Product Registration within 14 Days of Invoice

Fagor Kore 700 Series Gas Pasta Cooker with 2 Baskets – CP-G7126

Fagor Kore 700 Series Gas Pasta Cooker with 2 Baskets – CP-G7126

Fagor Kore 700 Series Gas Pasta Cooker with 2 Baskets – CP-G7126

Fagor Kore 700 Series Gas Pasta Cooker with 2 Baskets – CP-G7126

Gas Pasta Cooker with 2 Baskets – CP-G7126

  • Surface tops manufactured in 1.5 mm thick AISI-304 stainless steel.
  • Laser-cut joints, automatic welding and polishing. Hidden screws.
  • 1.5 mm thick AISI-316L stainless steel wells built into the surface top.
  • Wells that suit with different arrangements and measures of baskets.
  • The well is filled through the inlet solenoid valve with a two-position switch: average and high-speed filling.
  • Well drainage through a mechanical ball valve which is resistant to high temperatures and has a safety overflow.
  • Automatic safety system to stop the current if the water runs out.
  • Controls with a protective support base and system to prevent water infiltration.
  • Machines with IPX5 grade water protection.
  • GN-2/3 wells, with 26 litre capacity (they can be used with different positions of baskets of different sizes).
  • High-performance stainless-steel burner located outside of the well with a combustion chamber that enables heating of the base and sides of the well (up to the minimum filling level).
  • Burner ignition through electronic spark igniter. With an access tube for manual ignition.
  • Heating controlled through safety valve.
  • Standard provision: Two 1/3 type baskets.

 

2 Years Parts and Labour + 2 Years Parts only Warranty with Product Registration within 14 Days of Invoice

Fagor Kore 700 Series Gas Pasta Cooker with 3 Baskets – CP-G7140

Fagor Kore 700 Series Gas Pasta Cooker with 3 Baskets – CP-G7140

Fagor Kore 700 Series Gas Pasta Cooker with 3 Baskets – CP-G7140

Fagor Kore 700 Series Gas Pasta Cooker with 3 Baskets – CP-G7140

Gas Pasta Cooker with 3 Baskets – CP-G7140

  • Surface tops manufactured in 1.5 mm thick AISI-304 stainless steel.
  • Laser-cut joints, automatic welding and polishing. Hidden screws.
  • 1.5 mm thick AISI-316L stainless steel wells built into the surface top.
  • The well is filled through the inlet solenoid valve with a two-position switch: average and high-speed filling.
  • Well drainage through a mechanical ball valve which is resistant to high temperatures and has a safety overflow.
  • Automatic safety system to stop the current if the water runs out.
  • Controls with a protective support base and system to prevent water infiltration.
  • Machines with IPX5 grade water protection.
  • GN-1/1 wells, with 40 litre capacity (they can be used with different positions of baskets of different sizes).
  • High-performance stainless-steel burner located outside of the well with a combustion chamber that enables heating of the base and sides of the well (up to the minimum filling level).
  • Burner ignition through electronic spark igniter. With an access tube for manual ignition.
  • Heating controlled through safety valve.”

 

2 Years Parts and Labour + 2 Years Parts only Warranty with Product Registration